Granular Fertiliser

Granular Fertiliser

At Southern Fuel & Farm Supplies Ltd we offer a complete range of quality granular fertiliser for both livestock and tillage farms. Fertiliser is available in 50kg bags or 500kg bags or Top Lifts bags or bulk. Fertiliser can be collected from the branch, delivered to farm or bulk spread can be organized.

As fertiliser is one of the most expensive farm inputs, it is a major factor in determining the profitability of any farming enterprise. Therefore the choice of fertilisers been used should always depend on a crop’s nutritional requirements. A regular detailed soil analysis is useful in outlining individual  field and overall farm fertility. 

Many farmers and growers can overly concentrate on the major nutritional requirements of N, P and K. Minor elements such as Magnesium, Manganese, Copper and Zinc are equally important and must not be dismissed.

Contact our technical team at Southern Fuel & Farm Supplies Ltd who can advise you on the appropriate fertiliser based on soil test results and crop yield expectations.

Suppliers such as Gouldings , Grasslands AGCO and Target can assist us in manufacturing tailor made compounds specific to individual to your farm needs.  

Spreading granular fertiliser
High N’s
-19-0-15, 20-4-10, Sulpha Cut, 24-2.2-4.5, Leifi Start, Sulpha Graze, 27:2.5:5, Richland+ T.E. (23-2.5-5+S), 
NPK’s
10:10:20, 12:6-17, 13-6-20 +S, 14:7-14, 15:3-20, 164-20, 18:4:12, 18:6:12, 6:10:18, 7:6:17, 8:5:18 & Replenish.
PK’s
0:10:20, 0:7:30 & Basic Slag.
Straight K’s
Muriate of Potash, Sulphate of Potash.
Straight N’s
Sulphate of Ammonia, CAN, Sulpha CAN, Granular UREA, Selenistart +Se, Selenigrass +Se, Sweetgrass.
Other

✅ Gran Lime

✅ Maize starter 

You can collect your fertiliser from the branch or delivered to your farm. Bulk spread can be organised. 

Getting the Balance right

Soil fertility management is critical to ensuring that soils have and sustain the capacity
to meet the nutrient requirements of grass and crops. Here at Southern Fuel & Farm Supplies we can help can assist you for all your testing needs and advice on choosing the correct granular fertiliser for your farm.

Soil Sample

Guidelines to taking a soil sample 

✅ For sampling purposes divide the farm into fields or areas of between 2 – 4ha.

✅ Take separate samples from areas that differ in soil type, previous cropping history, slope, drainage or persistent poor yields.

✅ Avoid any unusual spots such as old fences, ditches, drinking troughs, dung or urine patches or where organic manure or lime has been heaped or spilled in the past.

✅ Do not sample a field for P and K until 3 – 6 months after last application of fertilizer P and K .Where lime has been applied allow a time lag of 2 years before sampling for lime requirements.

✅ Follow a ‘W’ soil sampling pattern to ensure that the sample is representative of the entire field.  Ensure that all soil cores are taken to the full 100mm depth.  Place the 20 cores in the soil box to make up the soil sample.

✅ Write the field number and sample number on the soil box.

✅ Recommended Soil Sampling Pattern

Lime

Apply lime as required to increase soil pH up to target pH for the crop. Maintaining the
soil pH at the optimum level will increase the microbiological activity of the soil, and
result in better soil nutrient recycling and release. Soil pH is also critical for maximising
the availability of nutrients applied in organic and chemical fertilizers.
The first thing to get right is soil pH, if soil test results show a lime requirement.
Lime should be applied to neutralise acidity and raise the pH.

Over-liming can be an issue in some circumstances, especially in grassland where there is
a history of high molybdenum (Mo) in soils. It is advised not to raise the pH above 6.2 in
these circumstances, as high Mo can cause copper deficiency in animals.

Most importantly do not to apply too much lime in a single application, as it can make
some trace elements unavailable.

The aim of P and K nutrient advice is to maintain all fields at the optimum soil fertility
level. The soil test measures the plant available P and K in mg/L of soil. For simplicity, this
result can be categorised into a soil Index for each nutrient. The soil Index system divides
soils into one of four soil Index levels based on the soil test result. The soil Index indicates
the expected response to nutrients applied. For example Index 1 soils are very responsive
while Index 4 soils have sufficient soil nutrient reserves and usually do not respond to
fresh P and K applications

Products available in store
ProductNPKSBCaMg
SUPERS
Granuphos 11.5   32.27.2
16% Superphosphate 16     
GRP 12     
NPK’s
Replenish + T.E182.5142  1.2
18-6-1218612    
18-6-12+S186124   
18-4-1218412    
18-4-1018410    
13-6-20+S136204   
15-3-20+S153203   
16-4-2016420    
10-10-20101020    
14-7-14+S147144   
7-6-17+SoP76178   
8-5-18+S8518 3.50.33  
HI-N’s
Richland + T.E22.72.5531.2  
27-2.5-5272.55    
24-2.5-10242.510    
Classic NP254     
Classic NK18.9 15    
18.6-0-15+S18.6 153.5   
20-4-1020410    
24-2.2-4.5242.24.5    
PK’s
0-7-30 730    
0-10-2001020    
Basik 4.516.5  123
POTASH
Muriate of Potash  50    
Sulphate of Potash  4216   
NITROGEN
Sweetgrass + 5% Na23  2  1.2
Selenigrass + Se25     2
Selenistart + Se42      
CAN27      
Sulpha CAN26.6  5   
Prilled Urea46      
Granular Urea46      
Sulphate of Ammonia21  24   
A.S.N.26  14   
OTHER
Gran Lime     381
Maize Starter1416     

Where to find us.
📍 Google Maps 📍
Midleton – http://bit.ly/SouthernFuelsMidleton
Glanmire – http://bit.ly/SouthernFuelsGlanmire